1414-N4-PH

Application

Designed for use as instrument enclosures, electric, hydraulic or pneu­­matic control housings, electrical junction boxes or terminal wiring enclosures.
Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
¶Standards

UL 508A Type 3R, 4, 12 and 13
CSA Type 3R, 4, 12 and 13
Complies with
NEMA Type 3R, 4, 12 and 13
JIC EGP-1-1967 unless marked¹
IEC 60529, IP66
¶Construction

Body formed from 16 or 14 gauge steel. Covers are formed from 14 gauge steel.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Welded brackets provide for enclosure mounting.
Continuous hinged cover is secured with stainless steel clamps and screws.
Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin.
Seamless poured-in place gasket.
All models larger than 4" x 4" include a removable 14 gauge inner panel.
Internal threaded weld studs are provided for mounting inner panels.
A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
¶Finish

Cover and enclosure are phos­phatized, finished in recoatable smooth ANSI 61 gray powder coating.
Removable inner panel is finished in white powder coating.