Actuator Material: Polyamide 6/6
Panel Thickness: 1.5 mm (0.059) min 4 mm (0.157) max
Robustness: IK06 according to EN 50102 (1 joule)
Salt Spray: IEC 512-6, test 11F
Sealing: Front Panel, IP67 according to EIC 60529
Shock Resistance: 100 g according to IEC 512-4, test 6c
Soldering: 320C max for 3 seconds
Switch Function: Off-Mom
Terminal Seal: Epoxy
Torque: 1.5 Nm max. applied to nut
Typical Operating Force: 6N +/- 2N
Packaging unit: 25 pieces
Operating Temp: -40C to + 85C
Bezel Material: Zinc die-cast (Zamac), black painted
Bushing Material: Zinc die-cast (Zamac), black painted
Case Material: Thermoplastic UL94-V0
Contact Bounce: 10 ms
Dielectric Strength: 1.500 Vrms
Hardware Supplied: 1 hex nut 14mm (.551) across flats and 1 O-ring. Hex nut part number-U166
Initial Contact Resistance: 100 milli Ohms max.
Insulation Resistance: 1 Giga Ohm min at 500VDC
Lens Material: Polycarbonate
Mechanical Life: 1 million cycles
Vibration Resistance: 10-500Hz 10 g according to IEC 512-4, test 6d